Head

Diameter

Head

Height

Overall

Length

After Weld

Length Reduction

Body

Diameter

Fillet

Diameter

61,000 psi

65,000 psi

minimum

minimum

49,000 psi

51,000 psi

minimum

minimum

17% minimum

20% minimum

14% minimum

15% minimum

50% minimum

50% minimum

Tensile Strength

Yield Strength

Elongation (% in 2”)

Elongation (% in 5x dia)

Reduction of Area

Fillet

Height

TYPE A STUDS are general purpose studs.

TYPE B STUDS are headed, bent, or of other configurations

that are used as an essential component in composite beam

design in construction.

Concrete Anchors can be made any length above the standard minimum.

A longer grip is usually needed when welding into angles.

Consult your Sales Representative for assistance with

accessories for this type of application.

WELD STUD SPECIFICATION

WELD STUD PACKAGING

WELD STUD WEIGHTS

Bluearc

P/N

HA37-137

HA37-162

HA37-212

HA37-262

HA37-312

HA37-412

HA37-612

Piece per

Box per

Pieces per

Box

Pallet

Pallet

Box

Pallet

1,000 Piece

Weight

Weight

Weight

70 lbs

1,890 lbs

68 lbs

79 lbs

2,133 lbs

77 lbs

Weld Base

Overall

Diameter

Length

3/8

3/8

3/8

3/8

3/8

3/8

3/8

1 3/8

1 5/8

2 1/8

2 5/8

3 1/8

4 1/8

6 1/8

1,000

27

1,000

27

700

27

600

27

500

27

350

27

200

27

27,000

27,000

HEADED CONCRETE ANCHOR

MECHANICAL PROPERTIES

TYPE A

TYPE B

18,900

67 lbs

1,809 lbs

92 lbs

16,200

66 lbs

1,782 lbs

111 lbs

13,500

62 lbs

1,674 lbs

124 lbs

9,450

55 lbs

1,485 lbs

154 lbs

5,400

44 lbs

1,188 lbs

212 lbs

Head Diameter @ 3/4” and Head Height @ 9/32” for all 3/8” Headed Concrete Anchors

Concrete Anchors:

Used in all types of concrete connections. They can be welded to flat or vertical surfaces, or to the inside or outside of an angle.

(see below)

Length:

Length listed is before weld. Stud diameters less than 5/8” will be approximately 1/8” shorter after weld - Stud diameters 5/8” - 3/4” will

be approximately 3/16” shorter - Stud diameters 1” will be approximately 1/4” shorter after weld.

Material:

Low carbon steel, ASTM A29, 1010-1020. Also available in weldable stainless steel. Type 302 is the most commonly used.

inside

angle

Chuck

Grip

Foot

Ferrule

STANDARD ACCESSORIES

Bare Beam Inside Angle Outside Angle

CH37

CH37

CH37

GS37

GLS37

GS37

FTSS20

FTSS20

FTSS20

outside

angle

37F

37I

37O

When Using Heavy Duty Ferrules Use Grip GS50

www.bluearcstudwelding.com